Neuer TBS Crossfire Diversity Nano RX und TBS Firmwareupdates

  • Moin zusammen,


    den Crossfire Nano RX gibt es jetzt auch als Diversity.

    Damit ergibt sich noch mehr Reichweite und er bekommt auch ein paar neue features.

    Die wohl interassenteste Sache ist die Backup Batterie, die an den Nano angeschlossen werden kann.

    Soweit ich das bis jetzt gehört habe, kann man hier eine 1S oder 2S Batterie anschließen.

    Die auch geladen wird, über den RX.

    Am besten ist da wohl nen alter Tinywhoop Lipo geeignet.


    https://www.team-blacksheep.co…MDdj1rdOchtbsNN5cnEghar4I


    Die Crossfire Firmware 2.87 sollte nach dem Update von TBS Agent X verfügbar sein!


    Update...


    Also den TBS Agent X muss man aktuell noch manuell von hier laden:
    https://www.team-blacksheep.com/products/prod:agentx


    und dann hat man auch schon die Firmware 2.88 verfügbar. Scheint sich wohl in letzter Sekunde doch noch was getan zu haben:


  • Ein neuer AgentX ist inzwischen auch verfügbar.

    Zitat Trappy:


    Mac Users: The new TBS Agent X is ready to test. It should fix all known bugs and problems. Thanks for your patience! Please give it a try and let us know if it works. Version number should be 2.0.6.

    Tomorrow, we fix the Windows version. Once that is done we'll do a Lounge episo

  • DrFrantic77

    Hat den Titel des Themas von „Neuer TBS Crossfire Diversity Nano RX und Firmware 2.87“ zu „Neuer TBS Crossfire Diversity Nano RX und TBS Firmwareupdates“ geändert.
  • Neuer TBS Agant im Anmarsch:


    New agent update. Try updating or configuring Pro32 VTx or other 32-bit TBS products via OTA. Simply plug in USB on the TX, use CRSF communication ports, and start configuring away.


    Share your experience as this is the beginning of something very, very new ;)


    Changelog 2.0.18


    - Added Skippable login for user accounts

    - Added Custom name feature for user devices

    - Added CRSF protocol firmware update

    - Added autoupdate to notify user when update available on start

    - Added autoupdate to ask user after downloading if they want to update immediately or on quit

    - Restructure the settings page

    - Added check for updates button

    - Added CRSF only devices detection support

    - Added send frame directly to device (for Dev)

    Note: windows 7 users may experience problems updating crossfire TX firmware, however can update a bootloader mode crossfire TX.

    windows 7 users are advised to manually press the button and plug in usb for crossfire TX for successful firmware update.


    Note: windows 7 users may experience problems updating crossfire TX firmware, however can update a bootloader mode crossfire TX. windows 7 users are advised to manually press the button and plug in usb for crossfire TX for successful firmware update.

  • BETA!!!!


    We've got a new V3.00 TBS Crossfire firmware release. ADHD version: 150Hz force mode. Telemetry on for racers. BETA!

    If you have time:

    A lot of changes under the hood were necessary (or deemed necessary 1f642.png:) ) to facilitate a higher grade of link stability in high-noise areas (read: dozens of active pilots), and at the same time expand the system scope of the Crossfire to all TBS devices (Fusion, Unify Pro, etc). While the FPV race mode was easily the highest priority, the beta (I said: BETA!) firmware has a lot of other things happening under the hood that we can't share publically yet. But, you get to test them anyway, without even knowing. Does that feel awkward? I hope it does 1f642.png:)

    We foresee the V3.00 being a stepping stone to a public release somewhere down the road with a lot more features, a higher degree of "polish", and some exciting prospects.

    The V3.00 has been tested on about a dozen race tracks, multiple continents by a handful of selected pilots and deemed to be a major improvement (the pilots already won major titles with this alpha firmware, but that's probably just because they are good pilots 1f642.png:) ). We'd now like to open up the firmware for a wider audience to test and give feedback on. As the fine print, I really want to point out that this is a beta firmware with massive changes (perhaps the biggest changes since the inception of Crossfire) so please test on closed courses and use in competitive format at your own risk. Please provide feedback on literally any little thing that you notice, as our developers are currently working on the finishing touches and we're really interested to hear your feedback!

    Firmware V3.00 changelog:

    - added: 868 and 915 race band for region open (allows more people in the same band)

    - added: Ability to force RF to 150Hz

    - added: RF profile selection: Dynamic (current standard), force 50Hz and force 150Hz

    - maintained: best drone radio link. innovative AF. choo choo!!